Installed fuel tank stiffeners on top skin.

 Fabricated and fitted small panel below fuel tank bay. Drilled fuel tank cover holes around bay. Still working on right wing.

 Fabricated and installed .032" root strip.

 Drilled bottom skin to right wing.

 Fitted and drilled bottom skin on right wing.

Trimmed and drilled #1 skin for right wing.

 Vacuum formed nose, fitted and drilled right wing skin #1

Formed, fitted and drilled in place #2 wing skin on the right wing.

 Formed, fitted and drilled in place #3 wing skin on the right wing.

 

Formed, fitted and drilled in place #4 wing skin on the right wing.

 Drilled and cleco-ed #5 skin in place.

 Marked rib locations on #5 skin, removed drilled rivet holes, and trimmed sheet to size.

 Vacuum formed #5 .020" wing skin aligned on wing.

 Painted aileron and flap supports.

 Set right wing frame in jig, leveled and shimmed into alignment.

 Put left wing in roof top storage.

Trimmed aileron pocket skin.

 

 Sanded, primed, dimpled, and riveted aileron pocket skins in place.

Fitted aluminum for aileron pocket.

Finished installing stiffners on left wing flap area. 

 

 Prepared stiffener for bottom of left wing flap area. Drilled , dimpled, and primed the stiffener.

 Installed stiffeners on top of flap trailing edge left wing.

 Bent stiffeners for flap area trailing edge. 

 Finished fuel tank cover, riveted stiffeners on.

 Fitted inspection covers, riveted rings in place.