Formed elevator ribs.

 Formed trailing edge of elevator. Fitted tubes to leading edge.

 

 Trimmed hinges to length drilled lubrication holes.Laid out elevator plans on table.

 Fabricated horizontal stabilizer and rudder hinges. Drilled hinges to stabilizer.

 Drilled and welded support wire and hinge bushings.

 Welded 2nd horizontal stabilizer.

 Drilled holes for trim drive. Fitted cross brace. Tack welded both sides of stabilizer.

 Fitted ribs to spar tubes.

 

 Drilled light weighting holes in horizontal stabilizer ribs and straighten.

 Formed ribs for horizontal stabilizer

 

 Started 2nd stabilizer. Bent leading edge tube to shape and cut to length. Cut trailing edge tube to length.

 Welded all joints on first horizontal stabilizer.

 Cleaned and tack welded elevator.

 
Fitted ribs to front and rear tubes. Fabricated trim drive bushings and angled stiffeners.

 Fabricated remaining ribs for first half of stabilizer.

 Fabricated two horizontal stabilizer ribs.

 Cut horizontal stabilizer rib forms on CNC router.

 Imported horizontal stabilizer rib forms into Fusion 360. Generated G-code and tested.

  Layed out horizontal stabilizer plan on work table.

 Fabricated and painted flap hinge brackets.

 Fabricated and painted aileron hing brackets.

 Pressure tested both tanks, and repaired leaks.

 Finished welding second tank.

 

 Welded all seams and ports on second fuel tank.

Finished welding first fuel tank.