Constructed wing assembly frame.

Welded left wing flap and aileron drive linkage.

Welded right wing flap and aileron drive linkage.

Fabricated wing end strut fittings.

Finished fuselage wing strut fittings.

Fabrcated aileron cable pulley brackets and started on fuselage wing strut fittings.

Fabricated aileron hinges and flap support at wing root.

Fabricated flap levers.

Fabricated flap drive arms.

Fabricated pieces for aileron bellcranks.

Fabricated aileron and flap drive support frame components.

Fabricated aileron and flap drive support brackets.

Riveted left rear spar rib attach angles.

Removed rib angles and spacers from left rear spar, de-burred prepared for paint and primed.

Fitted rib attach angles and spacers to left rear spar.

Assembled left rear spar,riveted cap strips and wing attach fittings.

Cut left rear spar root and tip ends to length. Cut lightening holes. De burred and prepared for paint spar web, cap strips, and wing attach fittings. Painted all.

Drilled cap strips, center splice plates, and attach fittings to left rear spar web.

De-burred left rear spar cap strips. Fabricated attach angle spacers.

Marked out rib and station positions on left rear spar. Drilled cap strips.

Painted right rear spar rib attach angles and spacers. Riveted angles to spar.

Fitted spacer bars and rib angles to right rear spar.

De burred rib attach angles and spacers. Fitted a few rib attach angles to right rear spar.

Riveted right rear spar cap strips. Cutout rib attach angles for rear spar

Assembled cap strips on right rear spar and prepared for riveting.