Drilled both wings bottom cap strips and de burred.

Drilled for rivets, de-burred, and sanded left wing main spar top cap strips.

Drilled rivet holes in right top wing cap strips.

Marked both main spar rib, aileron, flap, and cap strip locations. Sanded right wing top cap strips.

Cut spar cap strips to length, cut corners and de-burred.
Cut spar web to length.
Marked out drill pattern for top cap strips.

Started removing engine from RX-8

Unfortunately

 it was full of water and lots of rust making it

just a lot of spare parts 

Bent rear spars

Cutout and prepped rear spars

Bent main spars

Cut out main spars

Cut out remaining .125"  spar connecting plates

 A Rabbit.

Cut out spar .125" attachment and connecting plates

Formed Flap and straitened nose ribs
Formed and straitened aileron pocket ribs
Painted full size ribs

Deburred flap nose ribs
Deburred aileron pocket ribs
Cut counter balance holes in aileron nose ribs

Cutout form blocks for aileron pocket ribs
Cutout aileron pocket ribs
Formed aileron nose ribs

Flanged small lighting holes in full size rib
Drilled full size rib's  for stiffeners

 

Straitened and primed flap ribs

Deburred flap ribs

Cutout Flap Ribs

Cut out flap rib form blocks and flanging plugs

Flanged, fluted, and straitened full size ribs

Cutout flange plugs for full size rib

Cut out full size ribs

Cut and deburred one main spar

Made full rib forms
De burred aileron nose ribs