Bent longeron for fuselage top.

Drew layout for top fuselage on work table

Completed welding rudder.

 Tacked rudder together. Fabricated 1/4" stiffeners.

 Formed profiled and flat ribs.

 Bent leading and trialing edge tubes for rudder.

 Crimped leading edge tube and fabricated rudder horn.

 Transferred rudder drawing on to build table.

Completed welding right elevator.  

Fitted and tacked in place 1/4 inch stiffeners. Fabricated trim tab and hinges.

Fabricated ribs for right elevator. Bent tubes for leading and trailing edge.

 Finish welded left elevator.

 Tacked elevator tubes and ribs together.

Fabricated trim tab hinge and ribs.