More fitted rib attach angles on left main spar.

Fitted rib attach angles on left wing.

De burred main spar rib attach angles ,drilled for ribs.

Cut out 45 main spar rib attach angles.

Be burred and prepared for paint rib spacers.
Cut out 15 rib attach angles.

Riveted right spar center splice and wing to fuselage fitting.
Drilled right strut fitting to spar.
Cut spar rib spacers to length.
Drilled rivet holes in rib spacers.

Finished spar to strut fittings.
Drilled strut fittings to left spar.
Riveted right main spar cap strips.

Riveted left spare center splice and wing attach point.
Blanked spar to strut attach fittings,drilled holes, and milled to size.

Riveted left wing cap strips.

Prepared left main spare cap strips for paint, Painted left main spare components.

Drilled light weighting holes, de burred, and prepared for paint left main spar.

Assembled right main spar. Drilled cap strips, splice plate, and attachment plate to left wing spar.

De-burred finished sanded and painted right wing main spar.

Drilled center splice for right main spar, cut slot for strut attachment, cut light weighting holes in spare.

Drilled cap strips to right wing. Set center splice plates.

Drilled cap strips to right wing.

Lay out spar lightening holes and drilled hole centers. Cut 4 rib spacers and drilled.

Drilled both wings bottom cap strips and de burred.

Drilled for rivets, de-burred, and sanded left wing main spar top cap strips.

Drilled rivet holes in right top wing cap strips.

Marked both main spar rib, aileron, flap, and cap strip locations. Sanded right wing top cap strips.

Cut spar cap strips to length, cut corners and de-burred.
Cut spar web to length.
Marked out drill pattern for top cap strips.

Started removing engine from RX-8

Unfortunately

 it was full of water and lots of rust making it

just a lot of spare parts 

Bent rear spars

Cutout and prepped rear spars

Bent main spars

Cut out main spars

Cut out remaining .125"  spar connecting plates

 A Rabbit.